top of page

Paralee Harris Group

Public·11 members
Henry Yakushev
Henry Yakushev

The Watchmaker Activation Unlock Code And Serial


To check the warranty status of your watch, you need to perform the following steps:1. Go to section My Account2. Press the button Create Account and fill in all fields.3. Go to the section My Clock and choose the item Add Clock.4. Enter the serial number of your watch.5. Choose the type of guarantee - if you have been given a white guarantee card - choose the item physical guarantee, if you have been given a black guarantee card (it is not obligatory, on it only QR code with a reference to the section my watch) - choose an electronic guarantee.6. Under the image of the clock you have to choose international guarantee - there will be specified date of purchase and term of warranty service for your hours (2 or 3 years depending on the version of mechanism).




The Watchmaker Activation Unlock Code And Serial



To unlock this watch face for just $2.99: https:\/\/www.paypal.me\/yp12345\/2.99usd (IMPORTANT: Please attach the serial number for generating the unlock code), Please mention the \"Serial Number\" read in the first line in the setting page and an unlock code will be sent in order to activate it. The unlock code works on the whole life in your watch and still works after upgrade.How to get the serial number: Please open the connectiq and on your phone and find the watchface, open the setting and the first line is the unlock code. Thanks!A simplicity and richness watchface to show the analog time with second always on. It has Clear and clean watch face with always on second hand in efficient way, meanwhile it show rich info with rich configurations it support on-device setting on new device. On some devices it support on-device setting.simplicity and richness watchface is highly configurable, PRO functions(Configuraion with PRO) could be tried for a hour and it would be rolled back to the default values. There are more than 10 configurable fields:1) Plenty of face style and some are available in PRO mode: * Luminous Bar * Simplicity * Pencil(Pro) * Army(Pro) * Sword(Pro) * Diamond(Pro) * Diamond(Pro) * WhiteBar(Pro) * Fenix6 style(Pro) * Fenix6 style2(Pro)2) Second hand options: * Always on: As most watchface act; * On when it's worn(Default): Turn off the second hand to save battery when you are sleep; * On when lift the wrist: Act as the old watch which don't support always-on second hand; * Always off(to be developed): Extremely battery saving mode;3) sunrise\/sunset time: show the next sunrise\/sunset timeTo enable the sunrise\/sunset calculations and the weather, you need to lock the GPS location after installing this face. Just go to any activity that uses GPS and wait until 'GPS ready' appears, then exit the activity. Note that you will need to repeat this after changing your location, otherwise the displayed information will reflect your last location.4) 2nd time zone: The 2nd time zone: if it's in [-11, 11] we open the 2nd timezone, or it's disabled.5) 3:00 o'clock: Show the date and weekday: Now support English and Chinese;6) 6:00 o'clock: Show the steps: *disabled *icon with steps7) 9:00 o'clock: Show The heartrate: * disabled * Update every 1 minute. * Real time heart rate: Update every 1 second(Pro).8) 12:00 o'clock: Show the analog battery status: * disabled; * show analog battery volume; * show digital battery volume along with analog battery;9) Info below 12:00(Pro): * disabled; * user defined string; * weather: 1) it will be dimmer when it's out of date and you need to lift the wrist to update it with GPS\/BLE connected; 2) You need to get the GPS and phone connected before getting the weather; 3) You need to get the GPS once again once you change your location; - Altitude; - If bluetooth is connected; - ambient pressure. - GPS info. - Floors climbed (if avalibale) - Steps\/steps goal - Notification\/Alarm count; - Distance - Kcal - Active minute (if avalibale) ...10) Graph above 6:00(Pro): * Heart Rate history; * Colorful Heart Rate history; * Step history;11) background(not available on fenix6\/fenix6xpro): * black * white(To be developed) * newspaper style. We can present many useful info on the newspaper background. DATA AVALIABLE in background info: - Notification\/Alarm count; - Altitude; - If bluetooth is connected; - ambient pressure. - GPS info. - Floors climbed (if avalibale) - Steps\/steps goal - Distance - Kcal - Active minute (if avalibale)"; var appDescriptionMoreLabel = "More"; 中文版 -US/apps/c5a22e08-e5af-4e8c-87fd-7573389b32f7To unlock this watch face for just $2.99: (IMPORTANT: Please attach the serial number for generating the unlock code), Please mention the "Serial Number" read in the first line in the setting page and an unlock code will be sent in order to activate it. The unlock code works on the whole life in your watch and still works after upgrade.


Those users who wish to have continued access to the advanced features (the"Pro" version) after 60 days, or those who will be using Watch-O-Scope in acommercial endeavour (for example, a professional watchmaker) mustpurchase an activation key for the Pro version.


Example: if task A uses action Perform Task to start task B, then when task A is run by pressingthe Play button in the task edit screen, %caller1 in task B will show task=A, %caller2 will show ui.The format of each entry in the array is callertype(=callername(:subcallername))Caller types ares detailed below:profilea profile (when it's state changes). callername is either enter or exit depending on whether the profileactivated or deactivated. subcallername is the name of the profile, if it has one, otherwise anonscenea scene event, with callername being the scene name. For element events, subcallername is the element name. For action bar button presses, subcallername is the label if one was given. For scene-global events (e.g. Key), subcallername is event type uithe Play button in the task edit screen in the Tasker UIlaunchclicking a child application icon in the launchernbuttona notification action button, either from Tasker's permanent notification or one created with one of the Notify actions.callername specifies the label of the button if present.externalan external applicationqstilea Quick Settings tile. callername specifies the label of the tile.appshort an app shortcut (accessed via long-click on the Tasker icon). callername specifies the label of the tile.taskanother task, from a Perform Task action. subcallername is the task name, if it has one, otherwise anonpowermenuthe power menu on Android 11+.Global Built-In VariablesAirplane Mode Status(dynamic) %AIRWhether Airplane Mode is on or offAirplane Radios %AIRRA comma-separated list of the radios which will be disabled when entering Airplane Mode.Common radio names are: bluetooth, cell, nfc, wifi, wimax.Battery Level %BATT Current device battery level from 0-100.Bluetooth Status (dynamic)%BLUE Whether Bluetooth is on or in some other state (off).Calendar List%CALSNewline-separated list of calendars available on the device.Each entry is in the format calendarprovider:calendarname.Example usage:Variable Set, %newline, \nVariable Split, %CALS, %newlineFlash, %CALS(#) calendars, first one is %CALS(1)For the sign \n, press carriage-return on the keyboard.Calendar Event Title / Descr / Location%CALTITLE / %CALDESCR / %CALLOCThe title, description and location of the current calendar event, if there is one. If there are multiple current calendar events thevariables refer to the shortest.Tip: find other details about the current event(s) using the Misc / Test action, specifying %TIMES for the data.Call Name / Number/ Date / Time (In) (dynamic, monitored)%CNAME / %CNUM / %CDATE / %CTIMEThe caller name, number, date and time of the current (if a call is in progress) or last call received.Caller number is 0 if it's unknown.Caller name is ? if it's unknown (probably because the caller number was blocked)and set to the caller number if the contact couldn't be looked up.It's unavailable on Android versions prior to 2.0.Call Name / Number/ Date / Time / Duration (Out)(dynamic, monitored)%CONAME / %CONUM / %CODATE / %COTIME / %CODURThe called name, number, date and time of the last (not the current) outgoing call made.Called Nameis set to the called number if the contact couldn't be looked up.It's unavailable on Android versions prior to 2.0.Cell ID (monitored,dynamic)%CELLIDThe current cell tower ID if known.If you are using a Cell Near state, note that sometimes the Cell Near state will stay activeeven though %CELLID reports that the tower ID is unknown or invalid; that is because Cell Near onlyresponds to valid IDs to prevent the state becoming inactive e.g. due to a service interruption.For backwards compatibility, UMTS cells are reported with a GSM prefix.From Android 4.2, Tasker version 4.3+, cells could be found from 2 different network types simultaneously. In that case, the value is reported with preference for the network type leftmost on the list: GSM, CDMA, UMTS, LTE.Cell Signal Strength (monitored,dynamic)%CELLSIGThe current phone signal level from 0-8 inclusive on a rougly linear scale. On some phones, the level will rise in steps of 2 (0,2,4,6,8). The value is -1 if the valueis unknown or there is e.g. no service.From Android 4.2, Tasker version 4.3+, cells could be found from 2 different network types simultaneously. In that case, the value is reported with preference for the network type leftmost on the list: GSM, CDMA, UMTS, LTE.There is a bug with some Android versions that the reported signal strength is not updated until the device is turned off and on.Cell Service State (monitored,dynamic)%CELLSRVThe current phone service state. One of unknown, service, noservice, emergency, nopower.Clipboard Contents(monitored,dynamic)%CLIP The current contents of the system clipboard. Please note that the clipboard can't be accessed while the device's screen is securely locked.CPU Frequency%CPUFREQ The current frequency CPU 0 is running at. See also: CPU Control.CPU Governor%CPUGOV The current governor controlling the frequency of CPU 0. See also: CPU Control.Date %DATE Current human-readable date.Day of the Month %DAYM Current Day of the Month, starting at 1.Day of the Week %DAYW Current Day of the Week starting with Sunday.Device ID / Manufacturer / Model / Product%DEVID / %DEVMAN / %DEVMOD / %DEVPRODThe ID, manufacturer, model and product name of the device. Note: ID is not a uniqueidentifier for the device, but rather for the hardware of the device. See also: %DEVTID.Device Telephony ID%DEVTIDReturns the unique telephony-based ID for the device (e.g. for GSM the IMEI, for CDMA theMEID or ESN). Not available on all devices.Display Brightness%BRIGHT Current screen brightness, 0-255. On some devices, if the Android setting Auto Brightness is enabled, thevalue will always be 255.Display Timeout%DTOUT Current system screen timeout (seconds).Email From / Cc / Subject / Date / Time (dynamic)%EFROM / %ECC / %ESUBJ / %EDATE / %ETIMEThe From, Cc, Subject, Received Date and Received Time of the last email receivedby the K9 email agent.Free Memory%MEMFSystem free memory remaining in MB.GPS Status (monitored,dynamic Gingerbread+)%GPSWhether the system GPS receiver is on or off.Heart Rate (monitored,dynamic) %HEART The current detected heart rate in beats per minute.See also: state Heart Rate.The value will be negative for no contact (-1), accuracy unreliable (-2) or some other problem (-3)HTTP Response Code / Data / Content Length(dynamic)%HTTPR / %HTTPD / %HTTPLValues from the last HTTP POST/GET action.If the server doesn't return a content length, %HTTPL will be calculated from the returneddata where possible.Humidity (monitored,dynamic) %HUMIDITY The relative ambient air humidity in percent.See also: state Humidity.Input Method%IMETHODThe current active input method. Consists of 4 parts separated by commas: Method Name, SubType Name, Mode, Locale.To access particular parts, use the Variable Split action.Interrupt Mode (dynamic)%INTERRUPTOnly available on Android 5.0+, requires Tasker's notification access service to be enabled, see Android'sSound & Notification settings.Android 5.0+: the current state of interruptions mode on the device: none, priority or allSee Also: action Interrupt ModeAndroid 6.0+: the current state of Do Not Disturb mode on the device: none, priority, all or alarmsSee Also: action Do Not DisturbKeyguard Status%KEYGWhether the Keyguard is on or offLast Application%LAPPThe name of the application that was in the foreground before the current one e.g. Maps.Last Photo%FOTOThe filesystem path to the last photo taken by Tasker or thestandard system camera application.Light Level (monitored,dynamic)%LIGHTThe last recorded light level in lux.Note that Android does not return a value until the lightlevel changes, so to test the sensor is working you should put it near a bright light initially.May not change when the device display is off, see Menu / Prefs / More / Display Off Monitoring / Light Sensor.Location (dynamic) %LOCThe latitude and longitude of the last GPS fix.See note.Location Accuracy (dynamic)%LOCACCThe accuracy in metres of the last GPS fix.See note.Location Altitude (dynamic)%LOCALTThe altitude in metres of the last GPS fix, or 0 if unavailable.See note.Location Speed (dynamic)%LOCSPDThe speed in metres/second at the last GPS position fix or 0 if unavailable.See note.Location Fix Time Seconds (dynamic)%LOCTMSThe time in seconds of the last GPS fix. To get age of fix, take this away from %TIMES.This value is not set until an offset of the GPS time from the fixed time hasbeen calculated (should be after the first GPS fix) because the value is meaninglessuntil that point.See note.Location (Net) (dynamic)%LOCNThe latitude and longitude of the last network location fix.See note.Location Accuracy (Net) (dynamic)%LOCNACCThe accuracy in metres of the last network location fix.See note.Location Fix Time (Net) (dynamic)%LOCNTMSThe time in seconds of the last net location fix. To get age of fix, take this away from %TIMES.See note.Magnetic Field Strength (monitored,dynamic)%MFIELD The total magnitudes in micro-Teslas of the magnetic fields acting on all three axis of the devices sensor.Updated once per second.See Also: state Magnetic Field.Music Track (monitored,dynamic)%MTRACKThe current playing music track, supported for:Tasker actions Music Play and Music Play DirBuilt-in Android music-player, probably not on all devices howeverPower AMPBeyondPod (Tasker v1.2.1+)Phantom Music Control ProMedia UtilitiesPriority: if both Tasker and one of the other supported apps are playing simultaneously, thenon-Tasker track will be shown. If more than one of the other supported apps is playing simultaneuosly, behaviour is unspecified.Notes: if you don't have a supported player, you could try Phantom Music Control Pro or Media Utilities, which support a lot ofplayers and should pass the info on to Taskerpausing a track clears the variable, unpausing sets it againyour music player may need an option enabled in order to broadcast the track information, or the broadcast may only be available in a 'pro' versionMuted%MUTEDWhether the microphone is currently muted (on) or not (off).Night Mode %NIGHTThe current Android Night Mode.One of on, off or auto.If auto, Android will decide whether it should be in Night Mode itself.Notification Title (monitored, dynamic)%NTITLEThe title of the last notification shown in the status bar. Prior to KitKat, requires Tasker's accessibility serverto be running (see Android Accessibility Settings). From KitKat, requires Tasker's Notification Listener serviceto be running instead. In a task running as a result of a Notification or Notification Removed event, use variable %evtprm2 insteadof %NTITLE. This is much more reliable and you have access to other parts of the notification (%evtprm3 etc)Notifications generated by Tasker are not shown.Phone Number%PNUM The current phone number of the device, if it's in service.On some phones it doesn't work (Android limitation), seems related to the type of SIM.Pressure (monitored,dynamic)%PRESSURE The current air pressure on the device in millibars.May not change when the device display is off, see Menu / Prefs / Monitor / Display Off Monitoring / Pressure Sensor.Profiles Active (dynamic)%PACTIVE A comma-separated list of the currently active, named profiles in activation order. Duplicatenames will appear on the list only once. The list always starts and ends with a comma to make matching easier, if it's not empty.Profiles Enabled (dynamic)%PENABLEDA comma-separated list of the currently enabled, named profiles in creation order. Duplicatenames will appear on the list only once. The list always starts and ends with a comma to make matching easier, if it's not empty.Roaming%ROAMon if device is roaming on the current telephone network, otherwise off.Root Available%ROOTyes if root functions are available on this device, otherwise no.Screen (dynamic)%SCREENWhether the screen is on (value on) or off (value off).SDK Version%SDKThe numeric Android SDK versionof the device.Silent Mode (dynamic)%SILENTThe current state of silent mode: off, vibrate or on.From Android 5.0+ this variable is intended to only reflect whether the deviceis in vibrate mode (vibrate) or not (any other value), but the on value is included for backwardscompatibility and set when the device is not in vibrate mode and the interrupt mode is noneor priority.See Also: variable %INTERRUPT, actions Silent Mode and Interrupt Mode.SIM Serial Number%SIMNUMThe serial number of the SIM card, if one is presen


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page